Konica Minolta bizhub 361 Security Manual page 48

Administrator Operations
7
From the keyboard and keypad, enter a new User Password that may consist of 8 or more digits.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the screen shown in step 6.
8
Touch [OK].
? What happens if the User Password entered does not meet the requirements of the Password
Rules?
% If the User Password entered does not comply with the Password Rules, a message appears that
tells that the User Password entered cannot be used. Enter the correct User Password. For details
of the Password Rules, see
9
To prevent entry of a wrong password, enter the User Password that consists of 8 to 64 digits again.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the screen shown in step 6.
10
Touch [OK].
? What happens if there is a mismatch in the User Passwords?
% If there is a mismatch in the User Passwords, a message appears that tells that there is a mismatch
in the User Passwords. Perform steps 7 through 10 once again.
501/421/361
"Password Rules" on page 1-9.
2
2-31