Kyocera KM-2530 Operation Manual page 98

3. Printer Driver for Macintosh
3-5 Printer Specific Options
I Resolution:
Specifies the printing resolution (number of dots per inch) to be used when printing. Select between "600 dpi" and "300 dpi". The factory
default setting is "600 dpi".
I Eco Print:
Turning this setting "On" allows you to save on toner use. The factory default setting is "Off".
I KIR:
Turning this setting "On" allows the jaggies that appear around the edge of text and graphics to be evened out through the smoothing
process. The factory default setting is "Off".
I PagePolicy:
Perform this setting in conjunction with the settings to be made under "Paper source" on page 3-4.
[Auto Size Select] ................................ Select this setting when you want to select the source of paper feed according to the type of paper
[Cassette Base] ................................... Select this setting when you want to select the source of paper feed according to the tray under
* If you are going to select "Auto Select" under "Paper source", be sure to select "Auto Size Select" here or there is a possibility that
printing will be accomplished onto paper that is difference the expected.
I Job Storage:
Sets the printer driver type for code jobs under the Job Storage function.
I Paper Destination:
Specifies the location of ejection. Depending upon which option you have installed, you can select between the Job Separator and the
Finisher.
[Inner Tray] ........................................... Copies will be ejected onto the Inner tray.
[Job Separator] .................................... Copies will be ejected into the optional Job Separator.
[Finisher] .............................................. Copies will be ejected into the optional Finisher.
[Mail Box] ............................................. Copies will be ejected into the optional Mail Box.
* In order to set the location of ejection for the Job Separator or Finisher, it is necessary to first perform the setting for that optional
equipment under "Installable options" in step 9 on page 3-3.
I Staple:
It is possible to staple your copy sets if the optional Finisher is installed.
* The following settings are required before stapling is possible:
(1) Change the "Installable Options" setting in step 9 on page 3-3 to the following.
Select "Finisher" as the "Finisher" setting.
(2) "Printer Specific Options" setting on page 3-6.
Select "Finisher" as the "Paper Destination" setting.
(you are going to select "Auto Select" under "Paper source").
"Paper source".
3-6