Kyocera KM-2530 Operation Manual page 71

1. Procedure for Installing and Printing with a Printer Driver
Select the driver type.
7
From the list, select the type of driver to be installed, then click Next.
* Refer to "1-1 Included printer Drivers" on page 1-1 for information regarding each
printer driver.
The End User Licence Agreement will be displayed. Please read all of the contract
8
and, if you agree with the conditions contained therein, click on [Accept]. If you
click on [No] the installation procedure will quit.
All available options will be displayed. Select the items that you want to install and
9
then click on the [Next] button.
Select the connection type: Local or Network.
10
• Local: The printer is connected directly to the parallel port.
• Network: The printer is connected to the printer via network (using a network
interface).
* If Local is selected, proceed to step 12. If Network is selected, proceed to step
11.
Enter the network queue name or the path for the network queue in the box.
11
To select another network queue name, press Browse.
If you are going to use a local port for the network queue, click the check box
displayed below, then proceed to step 12.
Otherwise, proceed to step 13.
1-5