Kyocera KM-2530 Operation Manual page 75

1. Procedure for Installing and Printing with a Printer Driver
G Printing from the application
6
Use the application that you want to use to open the document that you want to
print.
Select [Print] in the [File] menu.
7
The [Print] dialogue box will appear.
Select the desired number of copies that you want to make and which pages are to
8
be printed.
Select this printer in the [Name] field.
Click on [Properties].
The Properties window will appear.
Click on the [Output] Tab.
9
Perform the following settings in order to staple your printed sets.
10
Select "Finishing Tray" as the "Output to" setting.
If a Finisher other than the Internal Finisher, or the Booklet Stitcher, is installed,
perform the setting that is appropriate for that device.
"Finishing Options" setting
1 Put a check mark in the [Collate] checkbox.
2 Put a check mark in the [Staple] checkbox.
Click on [OK]. You will be returned to the [Print] dialogue box. Click on [OK] once
11
again. Printing will begin.
1-9