Kyocera KM-2530 Operation Manual page 18

4. Selecting the Printer Settings
Use the numeric keys to input the first block of 3 digits of the
3
address then press the sharp (#) key in order to input the following
block of 3 digits.
• To change an entered address, press the sharp (#) key to select
the 3-digit block that you want to change and use the numeric keys
to enter the correct address.
Once the input of the IP address is completed, touch the "Close" key.
4
The display will return to the [TCP/IP] screen.
• To cancel the setting, touch the "Back" key.
$ Subnet Mask
Select "ON" under the "TCP/IP" setting.
1
Use the "L" and "M" cursor keys to select "Subnet Mask" and then
2
touch the "Change" key. The [Subnet Mask] screen will appear.
Enter the Subnet Mask address by following the same procedure as
3
for the IP Address.
% Gateway address
Select "ON" under the "TCP/IP" setting.
1
Use the "L" and "M" cursor keys to select "Gateway" and then touch
2
the "Change" key. The [Gateway] screen will appear.
Enter the Gateway address by following the same procedure as for
3
the IP Address.
4-6