Kyocera KM-2530 Operation Manual page 61

4. Selecting the Printer Settings
4-13 e-MPS settings
NOTE: The optional hard disk must be installed in order to use the e-MPS function.
For more information about e-MPS, refer to "2. Windows XD Driver" on page 2-1.
About the e-MPS settings
It is possible to perform e-MPS settings for the 6 items shown in the following chart.
For the most efficient use of the printer functions, select the various settings according to your printing needs.
1
Quick copy print out
2
Private print/Stored job print out
3
Virtual Mailbox data print out
4
Virtual Mailbox Data List print out
5
Code Job List print out
6
e-MPS configurations
The following maximum size settings can be performed for
the hard disk.
• Temporary protection for code jobs
• Permanent protection for code jobs
• Virtual Mailbox
The maximum number of quick copy jobs to be registered
can be set as well.
Item
Available settings
Print out of a quick copy
Print out of private and stored jobs
Print out of data in the Virtual
Mailbox
Print out of the Virtual Mailbox List
Print out of the Cod JOB List
Number of quick copy jobs,
temporary protection for code job
size, permanent protection for
code job size
4-49
Remarks
Prints out the print job that is
designated for the "Quick Copy" or
"Proof and Hold" setting in the printer
driver.
Prints out the print job that is
designated for the "Private Print" or
"Job Storage" setting in the printer
driver.
Prints out the print job that is saved
in the Virtual Mailbox which is
designated for the "Virtual Mailbox
(VMB)" setting in the printer driver.