Kyocera KM-2530 Operation Manual page 43

4. Selecting the Printer Settings
4-9 Hard disk settings
For more information about the hard disk, refer to "5. Options" on page 5-1.
About the hard disk settings
It is possible to perform hard disk settings for the 9 items shown in the following chart.
For the most efficient use of the printer functions, select the various settings according to your printing needs.
1
Writing data
If "Write Data" is selected here, the machine will enter a
"waiting for data" state until data is sent from the host
computer.
2
Partition List print out
3
Format hard disk
If "Yes" is selected here, the hard disk will be formatted.
4
Reading data
Reads the selected data from the hard disk.
5
Reading program data
Reads the selected program data from the hard disk.
6
Deleting data
Deletes the selected data from the hard disk.
7
Deleting font data
Deletes the selected font data from the hard disk.
8
Deleting program data
Deletes the selected program data from the hard disk.
9
Deleting macro data
Deletes the selected macro data from the hard disk.
Item
Available settings
Write Data
List of Partitions
Format
Select from among the data parti-
tion names that are displayed.
Select from among the program
partition names that are
displayed.
Select from among the data parti-
tion names that are displayed.
Select from among the fonts that
are displayed.
Select from among the program
partition names that are
displayed.
Select among the macro partition
names that are displayed.
4-31
Remarks
Formats the hard disk only when
there is a format error on the disk.
Displayed only when there is
appropriate data on the hard disk.
Displayed only when there is
appropriate program data on the hard
disk.
Displayed only when there is appro-
priate data on the hard disk.
Displayed only when there is appro-
priate font data on the hard disk.
Displayed only when there is appro-
priate program data on the hard disk.
Displayed only when there is appro-
priate macro data on the hard disk.