Kyocera KM-2530 Operation Manual page 90

2. Windows KX Driver
2-7 Device Settings Tab
I Device Options
If any optional devices are installed, put a check mark in the checkbox for that device and perform the corresponding settings here. Once
you have completed the setting for each option, the functions of that option will be available for use.
G Optional Paper Feeder (Trays 3 and 4)
Perform this setting according to the installed Option Cassette.
G Large Capacity Feeder
Perform this setting when the optional Large Capacity Feeder is installed.
G Duplex Unit
Perform this setting when the optional Duplex Unit is installed.
G Internal Finisher
Perform this setting when the optional Finisher is installed.
G Job Separator
Perform this setting when the optional Job Separator is installed.
G Finisher
Perform this setting when the optional Finisher is installed.
G Booklet Stitcher
Perform this setting when the optional Booklet Stitcher is installed.
G Mailbox
Perform this setting when the optional Mailbox Unit is installed. In order to perform Mailbox-related settings, it is first necessary to
complete the settings for the Finisher.
G Punch Unit
Perform this setting when the Finisher is equipped with a Punch Unit.
Put a check mark in the checkbox for [Finisher] or [Booklet Stitcher] and double-click on the [Booklet Stitcher] name. The [Punch Unit
Setting] dialog box will be displayed. Select the Punch Unit that is installed.
2-15