Kyocera KM-2530 Operation Manual page 82

2. Windows KX Driver
2-5 Prologue/Epilogue Tab
I Disable Feature
Make sure there is NO check mark in this checkbox if you want to use the printer's overlay function. The overlay function will allow you to
have selected macro data printed out on top of your documents.
I Add
Click on this button when you want to add the data of the file that is selected in the displayed list.
I Remove
Click on this button when you want to delete the selected file from the list.
I Edit
Click on this button when you want to edit the contents of the selected file.
Insertion point:
By REMOVING the check mark from the checkbox next to [Disable Feature], select a registered file from the list and click on the [Add]
button, the following settings will become available.
I None [Unassigned]
Print without using registered files.
I Beginning of the Print Job
The data for the selected file will be transmitted once, and embedded at the beginning of the print job data.
I End of the Print Job
The data for the selected file will be transmitted once, and embedded at the end of the print job data.
I Start of the Page
In the case of a multiple-page print job, the data for the selected file will be transmitted (embedded) at the beginning of the data for each
page.
I End of the Page
In the case of a multiple-page print job, the data for the selected file will be transmitted (embedded) at the end of the data for each page.
I Pages
When [Start of the Page] or [End of the Page] are selected, designate the desired page number here.
2-7