Logging In To Administrator Mode - Konica Minolta bizhub 223 User Manual

9.2 Login and logout

Logging in to administrator mode

To configure the system or network setting, log in to the administrator mode.
1
Select [Administrator], and then click [Login].
2
Enter the administrator password, and then click [OK].
% To log in to the user mode as an administrator, select [Administrator (User Mode)], and enter the
administrator password.
% Logging in to the administrator mode locks the control panel of this machine, and you will not be
able to use it.
% Depending on the status of this machine, you may not be able to log in to the administrator mode.
% If [Prohibited Functions When Authentication Error] in the Administrator Settings is set to Mode 2
and an incorrect password is entered the specified number of times, it is no longer possible to log
in to the administrator mode. For details on the Prohibited Functions When Authentication Error pa-
rameter, refer to the [User's Guide Copy Operations].
% The password entry page varies depending on the machine settings.
% You can display the explanation of functions (Help) when necessary. To display Help, select [ON] in
Display Setting.
[On Mouse]: Point the cursor to display Help.
[On Focus]: Select an item to display Help.
bizhub 423/363/283/223
9
9-11