Detail Settings; Position; Stamp/Composition - Header/Footer - Konica Minolta bizhub 223 User Manual

7.4 Print - Application (Public, Personal, or Group User Box)

Detail Settings

Press [Detail Settings] to specify the density, character size, and other items.
Item
[Density]
[Text Size]
[Pattern Over-
write]

Position

In the Stamp Repeat setting screen, press [Position] to determine the print position of the stamp, for example,
by angling the stamp or leaving a space.
Configure the following settings.
- Setting an angle of the stamp repeat within the area (+45 degrees/0 degrees/45 degrees)
- Inserting a space between stamp repeats
- Reordering printing order of stamp repeat
- Deleting the stamp repeat or space
Item
[Change Pos./De-
lete]
7.4.14

Stamp/Composition - Header/Footer

Configure settings to insert the header or footer. To insert the header or footer, you must register their con-
tents in Administrator Settings in advance. Press Check/Change Temporarily to temporarily change and print
the contents of the registered header and footer.
d
Reference
For details on how to register the header or footer, refer to the [User's Guide Network Scan/Fax/Network Fax
Operations].
Item
[Recall Head-
er/Footer]
[Check/Change
Temporarily]
[Reset]
bizhub 423/363/283/223
Description
Select the density from the light, standard, or dark.
Select the printing text size from Minimal, Standard, or Large.
Select pattern printing from [Front (Overwrite)], [Transparent], or [Back].
Description
Select Stamp Repeat to be changed, and press [Change Position]/[Insert
Space]/[Delete] to specify.
Description
Select the desired ones from the registered headers and footers.
Press this button to check or change the selected header or footer. For details, refer
to page 7-28.
Press this button to cancel the use of the temporarily changed header or footer.
7
7-27