System Settings - Konica Minolta bizhub 223 User Manual

9.6 Administrator Mode Overview
Item
[License Settings]
[Edit Font/Macro]
[Job Log]
Reference
- The following functions are available only when a Hard Disk is installed.
– [License Settings]
– [Edit Font/Macro] (This item is displayed, but cannot be specified.)
– [Job Log]
9.6.2

System Settings

Reference
- To use this machine as a scanner with the application software under TWAIN, install the dedicated driv-
er software KONICA MINOLTA TWAIN. For details, refer to the TWAIN driver manual in the CD sup-
plied together with this machine.
Item
[Machine Setting]
[Register Support Informa-
tion]
[Network TWAIN]
[User Box Setting]
[Stamp Settings]
[Blank Page Print Settings]
[Skip Job Operation Set-
tings]
[Flash Display Setting]
bizhub 423/363/283/223
Description
Allows you to issue a license and enable functions. Also, a request code
can be issued.
Adds font or macro.
Allows you to create and download log data of the jobs that were executed
in this machine.
Description
Changes the registration information of this machine.
Specify support information (such as contact name, corporate URL, or on-
line manual URL) of this machine. To display this information, select [Infor-
mation] - [Online Assistance].
Specify the time to release the operation lock when scanning (excluding
push-scanning). If necessary, configure settings to enable saving or read-
ing a document in or from the external memory.
Define the User Box functions such as deleting an unnecessary User Box
or specifying the document deletion time. If necessary, configure settings
to enable saving or reading a document in or from the external memory.
Register a header or footer. In addition, in [Fax TX Settings], specify wheth-
er to cancel the stamp setting for fax transmission.
Specify whether to print contents configured in [Stamp/Composition] on
blank pages.
Specify whether to skip a job.
Specify whether to allow or restrict the flash display.
9
9-35