Format Ssd; Hdd Encryption Setting - Konica Minolta bizhub 223 User Manual

8.3 Administrator Settings

Format SSD

This function formats the SSD.
0 To turn the main power switch off and on, first turn the main power off, and then turn it on after 10 or
more seconds have elapsed. Not doing so may result in an operation failure.
%
To format the HDD, select [Yes] to follow the displayed messages. After formatting has been complet-
ed, reboot this machine.
Reference
- Using the PageScope Web Connection export function backs up user registration information or ad-
dress data. For details, refer to the PageScope Web Connection online help.
- The following shows the data deleted by formatting the HDD.
– Program
– Address Book
– Authentication method setting
– User authentication setting
– Account track setting
– User Box
– User Box setting
– Documents in User Boxes
– Confidential RX User Box setting
– Bulletin Board User Box setting
- This function is not available when a Hard Disk is installed.

HDD Encryption Setting

You can configure HDD encryption setting. Specifying a 20-character encryption passphrase for the HDD
prevents the user from easily reading the data saved in the HDD.
0 Be sure to keep the specified encryption passphrase carefully so that you will never forget it.
0 The encryption passphrase setting must be configured by the administrator of this machine.
0 To turn the main power switch off and on, first turn the main power off, and then turn it on after 10 or
more seconds have elapsed. Not doing so may result in an operation failure.
%
Specify the encryption passphrase, and reboot this machine.
The encryption passphrase setting then becomes available.
Reference
- Enter the encryption passphrase using 20 characters. Note that all the characters must not be the
same.
- Encryption passphrase setting becomes available after this machine has been rebooted.
This function is available only when a Hard Disk is installed.
bizhub 423/363/283/223
8
8-31