Tray 1 Cover Assembly (Pl 9.1.2) - Xerox 3450B - Phaser B/W Laser Printer Service Manual

6.
Unlatch the retaining hooks on both sides of the Top Cover and the one at the left
rear corner. The hook at the left rear corner requires the use of a small
screwdriver to release. Remove the Top Cover Assembly from the printer.
Caution
Remove the cover carefully while feeding the cables and connectors
removed from the Main Board through the chassis access holes.

Tray 1 Cover Assembly (PL 9.1.2)

1.
Power down the printer and remove the power cord from the wall outlet.
2.
Open Tray 1.
Caution
Use caution when pushing outward on the top of the slot tracks in the next
Step. If you exert too much pressure you can break the track.
8-10 Phaser 3450 Laser Printer Service Manual
s3450-035