Left Cover Assembly (Pl 9.2.4) - Xerox 3450B - Phaser B/W Laser Printer Service Manual

Left Cover Assembly (PL 9.2.4)

1. Power down the printer and remove the power cord from the wall outlet.
2.
Remove the 2 screws securing the Left Cover to the back of the printer. You will
need to open the rear cover to access the upper screw.
Note
The rear cover will have to be closed most of the way when sliding the left
hand cover assembly to the rear so the cover will clear the bottom lip of the
rear cover. The rear cover will then have to be opened slightly to clear the
retaining boss for the upper screw.
3.
Slide the cover toward the back of the printer to disengage the 3 retaining hooks
on the lower edge of the cover, then lean the top of the cover outward and remove
it from the printer.
8-8 Phaser 3450 Laser Printer Service Manual
s3450-027