Xerox 3450B - Phaser B/W Laser Printer Service Manual page 123

3.
Using a small flat blade screwdriver spread the plastic latch hooks on the bottom
of the bearing while pulling up on the left end of the Exit Roller shaft.
Bearing
1.
4.
Press down on the tab securing the Exit Roller gear to the shaft. Remove the gear.
5.
Repeat the procedure for the bearing on the right end of the Exit Roller shaft and
remove the shaft.
6. Lift the Exit Shaft Assembly out of the exit frame.
Caution
The Exit Idler Roller Assemblies are not captured in the exit frame and can
be dropped.
7.
Lift the Exit Idler Roller Assemblies out of the exit frame.
8-26
Exit Roller
2.
Bearing
1.
Phaser 3450 Laser Printer Service Manual
1
2
3
Exit Idler Roller Assemblies
3.
1
2
Exit Gear
2.
s3450-054
s3450-055