Top Cover Assembly (Pl 9.2.1) - Xerox 3450B - Phaser B/W Laser Printer Service Manual

Top Cover Assembly (PL 9.2.1)

1. Remove the Print Cartridge (page 8-4) and protect it from light.
2.
Remove the Right Cover Assembly (page 8-7) and the Left Cover Assembly
(page 8-8) from the printer.
3.
Open Tray 1, the rear cover, and the front section of the Top Cover.
Note
If the NIC Card is installed, remove it ( page 8-17) to access the connectors
on the Main Board.
4.
Disconnect CN 4 (Front Panel) from the Main Board and CN 2 (Cover Open)
from the Cover Interconnect Board.
5.
Remove 3 screws (2 at the top front and 1 on the rear edge) that secure the Top
Cover to the printer assembly.
Service Parts Disassembly
CN 4
CN 20
s3450-034
8-9