HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual page 186
Fibre channel switch
Hide thumbs
Also See for AK241A - StorageWorks 8Gb Simple SAN Connection:
- Cli manual (332 pages) ,
- Cli manual (320 pages) ,
- Installation and reference manual (82 pages)
Table of Contents
Advertisement
Table 43
Parameter
NTPServerAddress
EmbeddedGUIEnabled
Examples The following is an example of the set setup system command:
8/20q FC Switch (admin) #> set setup system
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current
value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
EthNetworkDiscovery
EthNetworkAddress
EthNetworkMask
EthGatewayAddress
AdminTimeout
InactivityTimeout
LocalLogEnabled
RemoteLogEnabled
RemoteLogHostAddress
NTPClientEnabled
NTPServerAddress
EmbeddedGUIEnabled
See also
show setup
186 Command reference
System configuration settings (Continued)
system, page 223
Description
The IP address of the NTP server from which the NTP client
acquires the time and date. The default is 10.0.0.254.
Enables (True) or disables (False) the QuickTools management
application. Changing this parameter to False while QuickTools
is running will terminate the application. The default is True.
(1=Static, 2=Bootp, 3=Dhcp, 4=Rarp)
(dot-notated IP Address)
(dot-notated IP Address)
(dot-notated IP Address)
(dec value 0-1440 minutes, 0=never)
(dec value 0-1440 minutes, 0=never)
(True / False)
(True / False)
(dot-notated IP Address)
(True / False)
(dot-notated IP Address)
(True / False)
[Static
]
[10.0.0.1
]
[255.255.255.0]
[10.0.0.254
]
[30
]
[0
]
[True
]
[False
]
[10.0.0.254
]
[False
]
[10.0.0.254
]
[True
]
Advertisement
Table of Contents
