Group Type Parameters; Group Member Attributes - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual

Table 10
Attribute
Hash
Secret
copy [group_source] [group_destination]
Creates a new group named [group_destination] and copies the membership into the new group
from the group given by [group_source].
create [group] [type]
Creates a group with the name given by [group] with the type given by [type]. A group name
must begin with a letter and be no longer than 64 characters. Valid characters are 0–9, A–Z,
a–z, _, $, ^, and -. The security database supports a maximum of 16 groups. If you omit [type],
ISL is used.
Table 1 1
Parameter
isl
port
ms
edit [group] [member]
Initiates an editing session in which to change the attributes of a worldwide name given by
[member] in a group given by [group]. Member attributes that can be changed are described in
Table
Table 12
Attribute
Authentication
(ISL and Port Groups)
CTAuthentication
(MS Groups)
PrimaryHash
(ISL and Port Groups)
Hash
(MS Groups)
128 Command reference
MS group member attributes (Continued)
Description
The hash function to use to decipher the encrypted secret sent by the MS
group member. Hash values are MD5 or SHA-1.
Hexadecimal string that is encrypted by the hash function for
authentication with MS group members. The string has the following
lengths depending on the hash function:
• MD5 hash: 16-byte
• SHA- 1 hash: 20-byte
Table 1 1 describes the group type parameters.

Group type parameters

Description
Configures security for attachments to other switches.
Configures security for attachments to N_Port devices.
Configures security for attachments to N_Port devices that are issuing
management server commands.
12.

Group member attributes

Description
Enables (Chap) or disables (None) authentication using the
Challenge Handshake Authentication Protocol.
CT authentication. Enables (True) or disables (False)
authentication for MS group members. The default is False.
The preferred hash function to use to decipher the encrypted primary
secret sent by the member. The hash functions are MD5 or SHA-1. If
the member does not support the primary hash, the switch will use the
secondary hash.
The hash function to use to decipher the encrypted Secret sent by the
MS group member. Hash values are MD5 or SHA-1.