HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual page 125

The following is an example of the firmware install command using TFTP:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> firmware install
The switch will be reset.
to I/O traffic.
Continuing with this action will terminate all management sessions,
including any Telnet sessions. When the firmware activation is complete,
you may log in to the switch again.
Do you want to continue? [y/n]: y
Press 'q' and the ENTER key to abort this command.
FTP or TFTP
IP Address
Source Filename : 6.9.00.11_epc
About to install image.
Connected to 10.0.0.254 (10.0.0.254).
220 localhost.localdomain FTP server (Version wu-2.6.1-18) ready.
bin
200 Type set to I.
verbose
Verbose mode off.
This may take several seconds...
The switch will now reset.
Connection closed by foreign host.
See also image, page 136
This process will cause a disruption
: tftp
: 10.0.0.254
Do you want to continue? [y/n] y
8/20q Fibre Channel Switch command line interface guide 125