Set Beacon; Beacon State Parameters - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual
Fibre channel switch
Hide thumbs
Also See for AK241A - StorageWorks 8Gb Simple SAN Connection:
- Cli manual (332 pages) ,
- Cli manual (320 pages) ,
- Installation and reference manual (82 pages)
Table of Contents
Advertisement
set beacon
Description Enables or disables the flashing of the Logged-In LEDs for the purpose of locating a switch.
Authority None
Syntax
set beacon [state]
Operands
[state]
Table 25
Table 25
Parameter
on
off
Examples The following is an example of the set beacon command:
8/20q FC Switch #> set beacon on
160 Command reference
describes the beacon state parameters.
Beacon state parameters
Description
Enables the flashing beacon.
Disables the flashing beacon.
Advertisement
Table of Contents
