Accessing The Security Dialog Box; Changing The Password; Setting Password Protection - HP 339674-001 User Manual

64 HP KVM Server Console Switch User Guide

Accessing the Security Dialog Box

From the Main dialog box ("Accessing the Main Dialog Box" on page 41), click
Setup>Security. The Security dialog box is displayed.

Changing the Password

1. From the Security dialog box ("Accessing the Security Dialog Box" on page
2. Enter the new password in the New field, and then press the Enter key.
3. In the Repeat field, reenter the password and press the Enter key.
4. Click OK to change the password.

Setting Password Protection

1. From the Security dialog box ("Accessing the Security Dialog Box" on page
64), single-click in the New field and press the Enter key if the OSD is not
open, or double-click the New field.
IMPORTANT: A valid password must be alphanumeric and be 5 to 15
characters in length. Permitted characters are case-sensitive and can
consist of A–Z, 0–9, spaces, and hyphens.
64), set your password as described in the previous procedure.