Portcfgexport Options - HP AA979A - StorageWorks SAN Switch 2/8V Administrator's Manual

The following example enables the EX_Port (or VEX_Port) and assigns a Fabric ID of 30 to port 7.
switch:admin_06> portcfgexport 7 -a 1 -f 30
switch:admin_06> portcfgexport 7/10
Port 7/10
Admin:
State:
Pid format:
Operate mode:
Edge Fabric ID:
Preferred Domain ID:
Front WWN:
Fabric Parameters:
R_A_TOV:
E_D_TOV:
Authentication Type: None
DH Group: N/A
Hash Algorithm: N/A
Edge fabric's primary wwn: N/A
Edge fabric's version stamp: N/A

portCfgExport Options

This port can now connect to another switch. The following list describes the options for the
portCfgExport command. For more information about the portCfgExport and portCfgVexport
commands, see the Fabric OS Command Reference Manual.
-a
-f
-r
-e
212 Using the FC-FC routing service
info
enabled
NOT OK
Not Applicable
Brocade Native
30
160
50:06:06:9e:20:38:6e:1e
Auto Negotiate
Not Applicable
Not Applicable
Sets the EX_Port to enabled (1) or disabled (2). Admin use only.
Sets the fabric ID (1 to 128). Each edge fabric must have a unique ID, and
EX_Ports (or VEX_Ports) connected to the same edge fabric must have the same
fabric ID. The default value is the port number divided by 3, plus 2 and rounded
down.
R_A_TOV used for port negotiation (2000 - 120000).
E_D_TOV used for port negotiation (1000 - 60000).