HP AA979A - StorageWorks SAN Switch 2/8V Administrator's Manual page 186

Table 48 lists the supported configurations options for Fabric OS 5.2.x.
and resulting slot configurations.
NOTE: At the time of this document's release, HP does not support the FC4- 1 6IP blade. Consult
http://www.hp.com
Table 48 Supported configuration options
Option Number of
domains
1 1
2 2
5 1
1. L_Ports are not supported on the FC4-48 blade.
Table 49 Configuration options and resulting slot configurations
Option Result
1 One 128-port switch (Blade IDs 4, 17 on slots 1–4, 7–10. Blade ID 5 and 16 on slots
5, 6)
2 Two 64-port switches (Blade ID 4 on slots 1–4, 7–10. Blade ID 5 on slots 5, 6)
5 One 384-port switch (Blade IDs 4, 17, 18, 31, and 36 on slots 1–4, 7–10. Blade ID
16 on slots 5, 6)
See Table 46
The following sections contain procedures for obtaining chassis information and for configuring Director
domains using the chassisConfig command.
186 Configuring Directors
for the latest, updated information.
Maximum number
of ports per switch
128
64/64
384
on page 184 for details about the different blades, including their corresponding IDs.
Supported port Supported
blades CP blades
FC2- 1 6, FC4- 1 6 CP2 or CP4
FC2- 1 6 CP2
FC4- 1 6, FC4- 1 6IP, CP4
FC4-32, FR4- 1 8i,
1
FR4-48
Table 49 lists configuration options
Notes
Option 1 is the
default
configuration
for SAN
Director
2/128.
Option 5 is the
default
configuration
option for
4/256 SAN
Director.