HP AA979A - StorageWorks SAN Switch 2/8V Administrator's Manual page 312

Table 64 lists commands associated with Advanced Performance Monitoring. Advanced Performance
Monitor commands are available only to users with the admin or switchAdmin roles. For detailed
information on these commands, refer to the Fabric OS Command Reference Manual.
Table 64 APM commands
Command
perfAddEEMonitor
perfAddIPMonitor
perfAddReadMonitor
perfAddRwMonitor
perfAddSCSIMonitor
perfAddUserMonitor
perfAddWriteMonitor
perfCfgClear
perfCfgRestore
perfCfgSave
perfClearAlpaCrc
perfClearEEMonitor
perfClearFilterMonitor Clears filter-based monitor counters.
perfDelEEMonitor
perfDelFilterMonitor
perfMonitorClear
perfMonitorShow
perfSetPortEEMask
perfShowAlpaCrc
perfShowEEMonitor
perfShowFilterMonitor
perfShowPortEEMask
NOTE: The command examples in this chapter use the slot/port syntax required by SAN Director 2/128
and 4/256 SAN Director. For 4/16 SAN Switch and 4/8 SAN Switch, SAN Switch 2/8V, SAN Switch
2/16V, SAN Switch 2/32, SAN Switch 4/32, 4/64 SAN Switch and 400 MP Router switches, use only
the port number where needed in the commands.
312 Administering Advanced Performance Monitoring (APM)
Description
Add an end-to-end monitor to a port.
Add an IP monitor to a port.
Add a SCSI Read monitor to a port.
Add a SCSI Read and Write monitor to a port.
Add a SCSI traffic frame monitor to a port.
Add a filter-based monitor to a port.
Add a SCSI Write monitor to a port.
Clear the performance monitoring settings from nonvolatile
(flash) memory.
Restore performance monitoring settings from nonvolatile (flash)
memory.
Save the current performance monitoring settings to nonvolatile
(flash) memory.
Clear an AL_PA device CRC count by the port and AL_PA.
Clear end-to-end monitor counters on a port.
Delete an end-to-end monitor on port.
Delete a filter-based monitor.
Clear statistics counters of end-to-end, filter-based, and ISL
monitors on a port.
Display end-to-end, filter-based, and ISL monitors on a port.
Set overall mask for end-to-end (EE) monitors.
Display the AL_PA CRC count by port or by AL_PA.
Show user-defined end-to-end monitors.
Show filter-based monitors.
Display the current end-to-end mask of a port.