HP AA979A - StorageWorks SAN Switch 2/8V Administrator's Manual page 279

To enable the automatic transfer of trace dumps
1. Connect to the switch and log in as admin.
2. Enter the following command:
switch:admin> traceftp -e
To set up periodic checking of the remote server
1. Connect to the switch and log in as admin.
2. Enter the following command:
switch:admin> supportftp -t
interval
The is in hours. The minimum interval is 1 hour. Specify 0 hours to disable the checking feature.
To save a comprehensive set of diagnostic files to the server
1. Connect to the switch and log in as admin.
2. Enter the following command:
switch:admin> supportsave -c
interval
Fabric OS 5.2.x administrator guide 279