Configuring The Server Database - HP AA979A - StorageWorks SAN Switch 2/8V Administrator's Manual

Press Enter to update the nonvolatile memory and end the session.
16.
switch:admin> msconfigure
0 Done
1 Display the access list
2 Add member based on its Port/Node WWN
3 Delete member based on its Port/Node WWN
select : (0..3) [1] 3
Port/Node WWN (in hex): [00:00:00:00:00:00:00:00] 20:00:00:20:37:65:ce:aa
*WWN is successfully deleted from the MS ACL.
0 Done
1 Display the access list
2 Add member based on its Port/Node WWN
3 Delete member based on its Port/Node WWN
select : (0..3) [2] 1
MS Access List consists of (13): {
20:00:00:20:37:65:ce:aa
20:00:00:20:37:65:ce:bb
20:00:00:20:37:65:ce:ff
20:00:00:20:37:65:ce:11
20:00:00:20:37:65:ce:22
20:00:00:20:37:65:ce:33
10:00:00:60:69:04:11:24
10:00:00:60:69:04:11:23
21:00:00:e0:8b:04:70:3b
10:00:00:60:69:04:11:33
20:00:00:20:37:65:ce:55
20:00:00:20:37:65:ce:66
}
0 Done
1 Display the access list
2 Add member based on its Port/Node WWN
3 Delete member based on its Port/Node WWN
select : (0..3) [1] 0
done ...
Update the FLASH?
*Successfully saved the MS ACL to the flash.
switch:admin>

Configuring the server database

The management server database can be viewed or cleared. The command msPlClearDB will be
allowed only in AD0 and AD255.
To view the contents of the management server database
1. Connect to the switch and log in as admin.
2. Enter the msPlatShow command.
264 Configuring the distributed manager server
(yes, y, no, n): [yes] y