Examples Of Creating Dcc Policies; Creating An Scc Policy - HP AA979A - StorageWorks SAN Switch 2/8V Administrator's Manual

The member contains device or switch port information: deviceportWWN;switch(port) where:
deviceportWWN
switch
3. To save or activate the new policy, enter either the secPolicySave or the secPolicyActivate
command.
If neither of these commands is entered, the changes are lost when the session is logged out. For more
information about these commands, see
"Activating changes to ACL

Examples of creating DCC policies

To create the DCC policy "DCC_POLICY_server" that includes device 1 1:22:33:44:55:66:77:aa and port
1 and port 3 of switch domain 1:
switch:admin> secpolicycreate "DCC_POLICY_server", "11:22:33:44:55:66:77:aa;1(1,3)"
DCC_POLICY_server has been created
To create the DCC policy "DCC_POLICY_storage" that includes device port WWN
22:33:44:55:66:77:1 1:bb, all ports of switch domain 2, and all currently connected devices of switch
domain 2:
switch:admin> secpolicycreate "DCC_POLICY_storage", "22:33:44:55:66:77:11:bb;2[*]"
DCC_POLICY_storage has been created
To create the DCC policy "DCC_POLICY_abc" that includes device 33:44:55:66:77:1 1:22:cc and ports 1
through 6 and port 9 of switch domain 3:
switch:admin> secpolicycreate "DCC_POLICY_abc", "33:44:55:66:77:11:22:cc;3(1-6,9)"
DCC_POLICY_xxx has been created
To create the DCC policy "DCC_POLICY_example" that includes devices 44:55:66:77:22:33:44:dd and
33:44:55:66:77:1 1:22:cc, ports 1 through 4 of switch domain 4, and all devices currently connected to
ports 1 through 4 of switch domain 4:
switch:admin> secpolicycreate "DCC_POLICY_example",
"44:55:66:77:22:33:44:dd;33:44:55:66:77:11:22:cc;4[1-4]"
DCC_POLICY_xxx has been created

Creating an SCC policy

Fabric OS 5.2.x and higher supports a SCC policy in Fabric OS. An SCC policy created in Secure Fabric
OS cannot directly transfered to Fabric OS. Policies created in Secure Fabric OS are deleted when Secure
WWN of the device port.
Either the switch WWN, domain ID, or switch name. The
port can be specified by port or area number. Designating
ports automatically includes the devices currently attached
to those ports. The ports can be specified using any of the
following syntax methods:
(*) Selects all ports on the switch.
(1-6) Selects ports 1 through 6.
[*] Selects all ports and all devices attached to those ports.
[3, 9] Selects ports 3 and 9 and all devices attached to
those ports.
[1-3, 9] Selects ports 1, 2, 3, 9, and all devices attached to
those ports.
"Saving changes to ACL
policies" on page 108.
policies" on page 108 and
Fabric OS 5.2.x administrator guide 107