Fibre Channel Port Specifications
The Fibre Channel ports in the SAN Switch 2/8V, SAN Switch 2/16V and SAN
Switch 2/16N are compatible with SWL and LWL SFP transceivers. The strength
of the signal is determined by the type of transceiver in use.
The ports meet all required safety standards. For more information about these
standards, see
The ports are capable of operating at 2.125 Gb/sec or 1.0625 Gb/sec, and are able
to autosense the highest speed of which all attached devices are capable.
SAN Switch 2/8V, 2/16V and 2/16N Installation Guide
"Regulatory Compliance
Notices" on page 73.
Technical Specifications
89