HP AA979A - StorageWorks SAN Switch 2/8V Installation Manual page 82

Hp storageworks san switch 2/8v, 2/16v and 2/16n installation guide, v4.2.x (aa-rvulb-te, april 2004)
Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:
Table of Contents

Advertisement

Regulatory Compliance Notices
C. Usage Restrictions
Failure to comply with these usage restrictions may result in incorrect operation of
the system and points of access may emit laser radiation above the Class 1 limits
established by the IEC and U.S. DHHS.
82
WARNING:
Use of controls or adjustments or performance of procedures
other than those specified herein or in the laser product's installation guide
may result in hazardous radiation exposure. To reduce the risk of exposure to
hazardous radiation: Do not try to open the module enclosure. There are no
user-serviceable components inside. Do not operate controls, make
adjustments, or perform procedures to the laser device other than those
specified herein. Allow only HP Authorized Service technicians to repair the
unit.
SAN Switch 2/8V, 2/16V and 2/16N Installation Guide

Advertisement

Table of Contents
loading

Table of Contents