HP AA979A - StorageWorks SAN Switch 2/8V Installation Manual page 45

Note:
EIA cabinets.
Figure 12: Installing the switch into a rack (HP 10000 series or comparable EIA
cabinet)
SAN Switch 2/8V, 2/16V and 2/16N Installation Guide
This step applies to both the HP 10000 series, System/e cabinet or comparable
Insert the switch into the rack and install (2) #10-32 x 1/2-inch Phillips
pan-head screws with captive star lock washers with one on each side. See
Figure 12 and Figure 13.
Installing the SAN Switch
45