HP A7533A - Brocade 4Gb SAN Switch Base Release Note page 47

Hp storageworks fabric os 6.3.0c release notes (5697-0301, january 2010)
Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:
Table of Contents

Advertisement

Discovered that a stable working encryption group had split after a
successful I/O test run.
Detected termination of 0.weblinker.fcg on HP StorageWorks DC04
SAN Director.
Fabric OS 6.2.0 does not provide chassisinfo with snmpv1 without
adding and configuring an snmpv3 user.
Missing FICON interrupt on HP StorageWorks DC04 SAN Director.
Memory leak found during E_Port processing.
Calculation of TX port and Filter number can incorrectly corrupt the
Filter Redirect RAM.
Running configdefault may cause Kernel panic on HP Storage-
Works 4/256 SAN Director.
High CPU load occurs and no commands can be run after CALD alloc-
ated shared memory is not released by applications.
Pending Merge: Repeatedly disconnecting and then reconnecting the
ISL links between the HP StorageWorks Encryption SAN Switch in the
HA cluster environment while rekey operations are in progress may
cause data miscompare.
Encryption group does not automatically recover after it is split into 2
different islands.
Firmwaredownload failed on HP StorageWorks DC SAN Director.
Pending Merge: Host throughput drops 75% when rekey is started.
All LUNs in a container are showing target offline.
After encountering a rare error condition, a switch or director may fail
to clear an interrupt, resulting in a persistently high CPU load.
SNMP v3 user configuration reverts back to defaults after HAfail-
over.
IFCCs occur when disabling trunks and having DPS enabled.
Reset factory default using the faceplate pinhole caused FFDC and
VCM shows "No Communication" to the switch
Pending Megre: During rekey operations, continuously disconnecting
and reconnecting the ISL links between 2 cluster nodes, causes one of
the LUNs to hang at "LUN discovery" state.
Pending merge: Rekeying and toggling ISL to trigger HAC failover in
4 node dual fabric caused the DC Switch Encryption Blade in slot3 of
the DC SAN Director and Encryption SAN Switch fault: BKSW-1003]
HL_BES101, kSWD: Detected unexpected termination of: ''[4]CVLC.
Fixed in Fabric OS 6.3.0
Fixed in Fabric OS 6.3.0
Fixed in Fabric OS 6.3.0
Fixed in Fabric OS 6.3.0
Fixed in Fabric OS 6.3.0
Fixed in Fabric OS 6.3.0
Fixed in Fabric OS 6.3.0
Fixed in Fabric OS 6.3.0
Workaround prior to code change:
Run hafailover.
Fixed in Fabric OS 6.3.0
Fixed in Fabric OS 6.3.0
Fixed in Fabric OS 6.3.0
Fixed in Fabric OS 6.3.0
Fixed in Fabric OS 6.3.0
Fixed in Fabric OS 6.3.0
Fixed in Fabric OS 6.3.0
Fixed in Fabric OS 6.3.0
Fixed in Fabric OS 6.3.0
Fixed in Fabric OS 6.3.0
Fixed in Fabric OS 6.3.0
HP StorageWorks Fabric OS 6.3.0c Release Notes
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ae370a - brocade 4gb san switch 4/12

Table of Contents