HP A7533A - Brocade 4Gb SAN Switch Base Release Note page 68

Hp storageworks fabric os 6.3.0c release notes (5697-0301, january 2010)

Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:

Table of Contents

EE monitor counter is not incrementing after firmware upgrade to 6.2.0.

ISL monitor total transmit and number of destination domains monitored

counters show 0 when traffic is running thru this ISL.

SNMP: The swNs Table does not list all the name server entries.

Interopmode 2 - Value other than 0 or 1 in configdownload file will

enable default zone; I was expecting an error message.

IP monitor shows number of SCSI frames after deleting a SCSI filter

monitor and adding IP monitor on the same port.

Onboard Administrator used to manage 8 Gb SAN Switch for

BladeSystem c-Class is not able to read the switchname.

Statsclear does not clear porterrshow statistic data for field

"link fail " on 6-port 10Gb/s ISL blade.

"Cyptocfg --show -tapepool -all -stat" returns "Operation failed:" the

first time it's issued but displays valid output when immediately re-is-

sued.

With virtual fabric enabled, when no EE is present, cryptocfg show

localEE returns "EE detection aborted: IPC Failure".

A LUN with encryption mode: cleartext and encryption format: Brcd

Native, fails to read DF_Compatible tape media.

After repeatedly deleting and adding partitions, creating a new parti-

tion resulted in an ASSERT at "file = .../bccb/lib/utils/register.c, line

= 115, user mode" and termination of ficud.

SR Request for IBM PMH 85437,000,738 - HK Monetary.

Unable to clear Port Name from screen " Edit CUP Port Connectivity

Configuration."

SNMP changes required to better support snmp mib.

Rare Instances of warm recovery failure during upgrade due to small

timing window in library used by some services.

Fabstateshow log wrapping overwrites useful fabstate data on the

switch when interoperating with McDATA switches.

Fixed in Fabric OS 6.3.0