Using The Snmp Tab To Set Trap Levels - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B User Manual

Using the SNMP Tab to Set Trap Levels

Perform the following procedure to set trap levels.
1. Access the Switch Admin Window (see
2. Enter the admin user name and password.
3. Select the SNMP tab.
4. Select a Trap level from the drop-down menu. The level you select refers to
5. Click the Apply button.
Web Tools Version 3.1.x/4.1.x User Guide
on page 92).
the Event level that will prompt a trap. See
page 67
on .
Switch Admin Window
"About the Switch Admin
"About the Switch Events
Window"
Button"
111