Using The Upload/Download Tab; Performing A Firmware Download; Backing Up A Firmware Config File; Performing A Config Download To Switch - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B User Manual

Switch Admin Window

Using the Upload/Download Tab

The following sections show using the Upload/Download tab to download
firmware, backup a firmware config file, and perform a config download to a
switch.

Performing a Firmware Download

1. Access the Switch Admin Window (see
2. Enter the admin user name and password.
3. Select the Upload/Download tab.
4. Click the Firmware Download radio button.
5. Select the FTP transfer protocol from the drop-down menu.
6. Enter the User Name, Password, and Host IP information.
7. Enter the fully qualified path to the firmware file.
8. Click the Apply button.

Backing Up a Firmware Config File

1. Access the Switch Admin Window (see
2. Enter the admin user name and password.
3. Select the Upload/Download tab.
4. Click the Config Upload to Host radio button.
5. Select the FTP transfer protocol from the drop-down menu.
6. Enter the User Name, Password, and Host IP information.
7. Click the Apply button.

Performing a Config Download to Switch

1. Access the Switch Admin Window (see
106
on page 92).
FTP is the only supported transfer protocol in Fabric OS v4.1.
on page 92).
FTP is the only supported transfer protocol in Fabric OS v4.1.
on page 92).
"About the Switch Admin
"About the Switch Admin
"About the Switch Admin
Web Tools Version 3.1.x/4.1.x User Guide
Window"
Window"
Window"