Using Port Management
The operations available on the Port Management tab are described in the
following sections.
Enabling or Disabling a Port
When you disable a port, if that port is an ISL, the fabric reconfigures. If the port
was connected to a device, that device is no longer accessible from the fabric.
To enable or disable a port, perform the following steps.
1. Access the Admin Interface. See
2. Select the Admin icon from the switch graphic. See
3. Enter the admin level user name and password.
4. Select the Port Setting tab.
5. Check or uncheck the Enabled box that corresponds to the Port you wish to
6. Click the Apply button.
7. Check the log at the bottom of the screen for information regarding the switch
Enabling Trunking on a Port
To enable trunking on a port, perform the following steps.
1. Access the Admin Interface. See
2. Select the Admin icon from the switch graphic. See
3. Enter the admin level user name and password.
4. Select the Port Setting tab.
5. Check the Trunk box that corresponds to the port you wish to trunk.
6. Click the Apply button.
Web Tools Version 3.1.x/4.1.x User Guide
page 94 for more information.
on page 54.
The login dialog box appears.
enable/disable.
configuration changes.
page 94 for more information.
on page 54.
The login dialog box appears.
"Accessing the Switch Admin
"Switch Graphic
"Accessing the Switch Admin
"Switch Graphic
Port Management
Window" on
Buttons"
Window" on
Buttons"
251