Using The Network Config Tab; Configuring An Ethernet Ip Or Fc Ip Address; Configuring A Syslog Ip Address - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B User Manual

Switch Admin Window

Using the Network Config Tab

Use the Network Config tab to configure Ether

Configuring an Ethernet IP or FC IP Address

1. Access the Switch Admin Window (see
2. Enter the admin user name and password.
3. Select the Network Config tab.
4. Select the Ethernet or Fibre Channel IP address you want to configure.
Note:
by the Fibre Channel IP.
5. Enter an Ethernet or Fibre Channel address in the appropriate field (for
6. Click the Apply button.

Configuring a Syslog IP Address

1. Access the Switch Admin Window (see
2. Enter the admin user name and password.
3. Select the Network Config tab.
4. Enter a non-null IP address in one of the Syslog IP fields (for example,
5. Click the Add button. The configured IP is displayed in the Syslog IP
6. Click the Apply button.
102
on page 92).
If both the Fibre Channel IP and Ethernet IP are present, the switch is identified
example, 123.123.123.123).
on page 92).
123.123.123.123).
window.
"About the Switch Admin
"About the Switch Admin
Web Tools Version 3.1.x/4.1.x User Guide
Window"
Window"