Using HA Admin
The following sections show how to access the HA Admin interface, how to use it
to synchronize services on the CP, and how to initiate a CP failover.
Accessing the HA Admin Interface
Perform the following steps to access the HA Admin interface.
1. Launch the web browser.
2. Enter the IP address in the Location/Address field and press Enter.
3. Click a switch in the Fabric Tree.
4. Click the Hi Avail icon on the switch panel.
Synchronizing Services on the CP
A non-disruptive CP Failover is only possible when all the services have been
synchronized. To synchronize the services perform the following:
1. Launch the web browser.
2. Enter the IP address in the Location/Address field and press Enter.
3. Click a switch in the Fabric Tree.
4. Click the Hi Avail icon on the switch panel.
5. Verify that HA Summary field displays Non-Disruptive Failover Ready.
Web Tools Version 3.1.x/4.1.x User Guide
Example:
http://123.123.123.123
Web Tools launches, displaying Fabric Tree.
The Switch graphic appears.
The HA Admin window appears as shown in
Example:
http://123.123.123.123
Web Tools launches, displaying Switch Explorer View.
The Switch graphic appears.
The HA Admin window appears as shown in
Switch Management
Figure
17.
Figure
17.
89