Beacon Button—Physically Locating a Switch in a Fabric
To physically locate a switch in a fabric, use the Beacon button as described in the
following steps.
1. Launch Web Tools by entering the IP address of the switch you wish to locate.
2. Highlight the switch in the Fabric Tree.
3. Select the Beacon button on the switch View.
4. Look at the physical switches in your installation to locate the desired switch.
Web Tools Version 3.1.x/4.1.x User Guide
The selected switch appears in the Switch View.
The LED lights on the selected switch light up and run back and forth across
the switch.
Switch Management
77