Exiting The Control Panel - HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual

Exiting the
Control Panel
Notes
for Setup
To finish using the control panel view mode or setup mode, press
to cancel. You will see one of the following displays:
Press to confirm the exit.
If your IP address, subnet mask, and gateway settings are
inconsistent when you attempt to exit from setup mode, the
error message shown below displays for three seconds.
In response, press
addressing parameters to correct the inconsistency. If you do
exit without correcting the error, the server may be inaccessible
on the network.
When you exit setup mode, your changes are saved and take
effect.
Startup of the server will continue until the file system is ready
and the server is ready for client access. Verify that you see the
normal operating display on the front of the server, as described
in "Normal Operating State" on page 6-4.
e ?
o
or wait three seconds. Return to the three
Configuration Using the Control Panel 3
e ?
o
-
5