HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 30

-
2 14 Installation
14. When you reach the Finish page, click the Finish button to apply
the setup changes you have made and to exit the wizard.
• If the changes you have made in the wizard require
restarting the server (as server name and IP changes
require, for example), you will see a check in the box for
Restart Server. Allowing the box to remain checked when
you click Finish causes the server to be restarted
immediately. After your server restarts, your web browser
should automatically reconnect to the server. The page
displayed will be the HD Server Admin's Identity page
shown on page 4-3.
• If you did not make changes that require restarting the
server, then your web browser immediately displays the
HD Server Admin's Identity page shown on page 4-3.
15. Your next step depends on whether you need to further modify the
configuration and user setup. Meanwhile, the server is available
as configured by the wizard.
• If no more changes are required, you can skip to chapter 5,
"Setting Up Client Access".
• If more configuration changes are required, you can make
them now in HD Server Admin. The following reference list
may help you decide.