In-Wall Cable Connections - Yamaha MCX-C15 - MusicCAST Network Audio Player Install Manual

In-wall cable connections

Method 1
Using the MCX-C15 and MCX-CA15 with the I/O box
Use this configuration method if you want to use the MCX-CA15 as a companion to the MCX-C15. This
configuration also allows you to control YAMAHA AV receivers connected to the MCX-CA15 from the
MCX-C15's remote control using YAMAHA AV link technology.
In this configuration, the MCX-CA15 is fully controllable from the MCX-C15.
CAUTIONS
• Complete all other connections before connecting to a live power source.
• Be sure to set the MODE switch on the inside front panel of the MCX-CA15 to "A" before
connecting to a live power source.
To an amplifier To a subwoofer
or receiver (optional)
(optional) (see page 15)
(see page 16)
A B C
MODE
MCX-CA15
AUDIO OUT SW OUT
AUDIO IN IR/CTRL VIDEO OUT
DC IN 12V
STATUS
MCX-CA15
IR flasher
(optional)
(see page 17)
Note
Connect the AV OUT terminal on the MCX-C15 to the AV IN terminal on the MCX-CA15 using the supplied
CAT-5 cable. Connect the LAN terminal on the MCX-C15 to a hub or router using a commercially available
CAT-5 cable.
MENU
AV OUT
AV IN
CAT-5 cable
To a TV or
monitor
(optional)
(see page 15)
DC IN/OUT
DC power cable
SPEAKER
OUT
Speaker cables
(commercially available)
To speakers
(see page 11)
MAKING IN-WALL CONNECTIONS
MCX-C15
MCX-C15
LAN
VOL
1 2 3 4
FAVORITES
(commercially available)
DC IN
DC power
cable
To a hub or
router
(see page 12)
CAT-5 cable
I/O box (MCX-IB15)
Power
cable
AC adaptor
(LSE0215C1240)
7