Before Using The Musiccast System; Upgrading The Musiccast System Firmware - Yamaha MCX-C15 - MusicCAST Network Audio Player Install Manual

BEFORE USING THE MusicCAST SYSTEM

Upgrading the MusicCAST
system firmware
After installation of the MCX-C15 is complete, you
must upgrade the MusicCAST system firmware on
the MCX-1000 (hereafter, "the server") using the
Upgrade CD-ROM (MusicCAST Software Version
Up Disc Vol. 2.1 Including MCX-C15 Connectivity)
provided with the MCX-C15 (hereafter, "the
client").
CAUTION
If the MusicCAST firmware is not upgraded,
your client may not function correctly.
Notes
• Before upgrading the MusicCAST system
firmware, be sure to stop playback on all
MusicCAST clients connected to the server.
• For information on function upgrades for the
server, see the Version Upgrade Manual Vol. 2
available on the Owner's Manual CD-ROM
provided with the client.
• If an MCX-A10 client (wireless/wired type) is
connected to the MusicCAST system, it must
also be upgraded. For details, see the Version
Upgrade Manual Vol. 2 available on the Owner's
Manual CD-ROM provided with the client.
Server operation:
1
Press TOP MENU on the server.
2
Press u / d to choose "System Setup"
and press SELECT.
3
Press u / d to choose "System
Utilities" and press SELECT.
4
Press u / d to choose "System
Update" and press SELECT.
The System Update screen appears.
5
Press OPEN/CLOSE to open the disc
tray, and insert the Upgrade CD-ROM
(MusicCAST Software Version Up Disc
Vol. 3).
6
Press OPEN/CLOSE to close the disc
tray.
The server automatically checks the content of
the upgrade CD-ROM, and the message
"Update CD is ready" appears on the on-screen
display.
7
Press SELECT.
The message "READING" appears on the
on-screen display.
After the upgrade CD-ROM is read, the
message "UPDATE OK" appears in the lower
left corner of the screen.
8
Press OPEN/CLOSE to open the disc
tray and remove the upgrade CD-ROM,
then press STANDBY/ON.
The MusicCAST server switches to standby
mode.
9
Press STANDBY/ON once again to turn
on the server.
The upgrade process is complete.
Notes
• If the message "Update CD is ready" does not
appear on the display, press OPEN/CLOSE to
eject the upgrade CD-ROM and reload it in the
disc tray. If the message does not appear after
reloading the CD-ROM, contact the store of
purchase or your nearest YAMAHA dealer.
• Depending on the version currently installed on
your server and MCX-A10 client, you may need
to upgrade the MusicCAST system firmware
more than once.
19