Yamaha MCX-C15 - MusicCAST Network Audio Player Install Manual page 28

4
Enter the client's IP address.
Press u / d to select numbers and j / i to
move the cursor to the left or right.
Be sure to enter all four numbers.
5
When you have finished, press SELECT
to confirm the IP address.
6
Press u / d to choose "Save & Network
Restart" and press SELECT.
The client resets its network hardware.
[ 0. 0. 0. 0]
Save&Network restart
Cancel
To cancel without making any changes, choose
"Cancel" and press SELECT.
Setting the subnet mask address
You can manually enter the subnet mask. This
setting is only possible when the DHCP mode is set
to "NO".
y
You must enter the subnet mask exactly as it appears
on your server. To view the server's subnet mask,
see the MCX-1000 Owner's Manual, page 112.
1
Select "Setup" > "Network" > "Manual
Setup" from the Top Menu.
2
Press u / d to choose "Subnet Mask"
and press SELECT.
Manual Setup
IP Address
Subnet Mask
CONFIGURING THE CLIENT
3
Move the cursor to the subnet mask
field and press SELECT.
[ 0. 0. 0. 0]
Save&Network restart
Cancel
4
Enter the subnet mask address.
Preee u / d to select numbers and j / i to
move the cursor to the left or right.
Be sure to enter all four numbers.
5
When you have finished, press SELECT
to confirm the subnet mask address.
6
Press u / d to choose "Save & Network
Restart" and press SELECT.
The client resets its network hardware.
[ 0. 0. 0. 0]
Save&Network restart
Cancel
To cancel without making any changes, choose
"Cancel" and press SELECT.
27