Resetting To The Factory Presets - Yamaha MCX-C15 - MusicCAST Network Audio Player Install Manual

Resetting to the factory
presets
If you want to reset all of your client's parameters
for any reason, do the following. This procedure
resets ALL parameters, including the FAVORITES
buttons, etc. This procedure should be performed in
the following situations only:
• When your client appears to be functioning
incorrectly for no apparent reason, and reference
to "TROUBLESHOOTING" (page 56) is of no
assistance.
• When you have made multiple mistakes in
setting the parameters on your client and wish to
start again.
• When you wish to reset the client completely for
use in a different MusicCAST network.
CAUTIONS
• Resetting the client to its default settings
will not reverse any updates to the
firmware, or erase any data stored on
your MusicCAST network.
• Because this procedure resets all of the
client's parameters to their initial
settings, you need to set them again after
performing the reset procedure.
• Note that when resetting all parameters,
the client also resets its network
parameters, and disconnects itself from
your MusicCAST network.
MCX-3 WD01440
LIBRARY
VOL
MUTE
FAVORITES
1 2
SELECT
1
PLAY
MENU
INFO.
PAUSE
1 2
STOP
4 5
GROUP PLAY
7
5
OFF TIMER ON TIMER
3 4
2-4
BOOKMARK
INPUT
RANDOM
3
REPEAT
6
GROUP RECALL
S
1
Press and hold MENU until the Top
Menu screen is displayed.
2
Press u / d to choose "Setup" and
press SELECT.
Top Menu
Edit Bookmark
Setup
3
Press u / d to choose "System" and
press SELECT.
Setup
Network
System
4
Press u / d to choose "System Reset"
and press SELECT.
System
System Update
System Reset
5
Press p to begin the resetting process.
Press PLAY to restore
to factory setting.
To cancel without resetting, press j .
6
The client automatically switches itself
off and then on again.
The resetting process is complete.
Note
You cannot reset the client to the factory presets if it
is locked from the server. See "To unlock a client
from the server" (page 54).
SYSTEM SETTINGS
53