Yamaha MCX-C15 - MusicCAST Network Audio Player Install Manual page 9

MAKING IN-WALL CONNECTIONS
Method 2
Using the MCX-C15 and MCX-CA15
Use this configuration method if you want to use the MCX-CA15 as a companion to the MCX-C15. This
configuration also allows you to control YAMAHA AV receivers connected to the MCX-CA15 from the
MCX-C15's remote control using YAMAHA AV link technology.
In this configuration, the MCX-CA15 supplies power to the MCX-C15.
CAUTIONS
• Complete all other connections before connecting to a live power source.
• Be sure to set the MODE switch on the inside front panel of the MCX-CA15 to "A" before
connecting to a live power source.
To an amplifier or
receiver
(optional)
(see page 16)
A B C
MODE
MCX-CA15
AUDIO OUT
AUDIO IN IR/CTRL
STATUS
MCX-CA15
IR flasher
(optional)
(see page 17)
Note
Connect the AV OUT terminal on the MCX-C15 to the AV IN terminal on the MCX-CA15 using the supplied
CAT-5 cable. Connect the LAN terminal on the MCX-C15 to a hub or router using a commercially available
CAT-5 cable.
8
To a subwoofer
(optional)
(see page 15)
AV OUT
AV IN
SW OUT
DC IN/OUT
VIDEO OUT
DC IN 12V
SPEAKER
OUT
Speaker cables
(commercially available)
To speakers
(see page 11)
MCX-C15
MCX-C15
LAN
MENU
VOL
1 2 3 4
FAVORITES
DC IN
CAT-5
cable
DC power cable
To a TV or monitor
(optional)
(see page 15)
AC adaptor
(LSE0215C1240)
To a hub or
router
(see page 12)
CAT-5 cable
(commercially available)
Power
cable