Checking Network Settings - Yamaha MCX-C15 - MusicCAST Network Audio Player Install Manual

CHECKING NETWORK SETTINGS

You can check your client's current network settings
using the following procedure.
If they are incorrect (for example, you cannot access
the server), see the Install Manual, page 25 for
details on how to manually configure the network
settings for your client.
Note
These settings cannot be changed if the client is
locked from the server. To remove the lock, see "To
unlock a client from the server" (page 54).
MCX-3 WD01440
LIBRARY
VOL
MUTE
FAVORITES
1 2 3
SELECT
1
PLAY
MENU INPUT
INFO.
PAUSE
1 2
STOP
4 5
GROUP PLAY GROUP
7
OFF TIMER ON TIMER
1
Press and hold MENU until the Top
Menu screen is displayed.
2
Press u / d to choose "Setup" and
press SELECT.
Top Menu
Edit Bookmark
Setup
3
Press u / d to choose "Network" and
press SELECT.
Setup
Contrast
Network
4
2-6
BOOKMARK
RANDOM
3
REPEAT
6
RECALL
S
4
Press u / d to choose "Status" and
press SELECT.
Network
Status
Auto Configuration
5
Press u / d to choose "IP Address" and
press SELECT.
Status
IP Address
Your client's network settings are displayed.
IP Address
ID: [
IP: [ 0. 0. 0. 0]
ID The unique ID used to identify your
client on the network.
IP
The IP address used by your client.
Press d to display the following:
Msk
The subnet mask your client is
operating under.
MAC The MAC address of your client. This
is a unique identification code used by
your client within the MusicCAST
network.
6
When finished, press j to return to the
Top Menu screen.
]
55