Configuring The Client; Turning On The Power - Yamaha MCX-C15 - MusicCAST Network Audio Player Install Manual

Turning on the power

When all connections and the MusicCAST system
firmware upgrade are complete, turn on the client's
power.
The client has two operation modes:
On The client is connected to a power source
and is in operation mode.
Sleep The client is connected to a power source
and activates only when the unit is
operated or it receives an infrared signal
from the remote control.
Before proceeding, make sure the power to
the server is turned on.
1
Press on either the remote control
or front panel.
The client turns on and the MusicCAST Startup
screen is displayed.
2
The client attempts to connect to the
server, and the following screen is
displayed.
Connecting...

CONFIGURING THE CLIENT

3
If the client is able to make a
connection, the Top Menu screen
appears and the network connection
icon appears in the top right corner of
the display.
Top Menu
Library
Recall Play
If the client is unable to connect to the server, it
continues displaying the "Connecting..."
message. Press any button on the client to
cancel the connection process, then check that
your client network connection settings are
correct. For details, see the MCX-C15 Owner's
Manual, page 55.
Note
If no operation is performed for 30 minutes, the
client automatically switches to sleep mode. Press
SELECT or to reactivate the client.
Network
connection icon
23