Connecting An Ir Flasher - Yamaha MCX-C15 - MusicCAST Network Audio Player Install Manual

Connecting an IR flasher

If you want to use YAMAHA AV link technology to
control a YAMAHA AV receiver, you must connect
an IR flasher to the MCX-CA15 or I/O box.
Note
Make sure the MODE switch on the inside front
panel of the MCX-CA15 is set to "A" when
connecting an IR flasher.
To connect an IR flasher to the
MCX-CA15
Connect the IR flasher to the IR/CTRL jack
on the front panel of the MCX-CA15.
MCX-CA15
AUDIO OUT SW OUT
AUDIO IN IR/CTRL VIDEO OUT
DC IN 12V
STATUS
MCX-CA15
To connect an IR flasher to the I/O
box
Connect the IR flasher to the IR OUT jack on
the I/O box.
I/O box
(MCX-IB15)
IR flasher
IR flasher
CONNECTING OPTIONAL COMPONENTS
17