Resetting To The Factory Preset Value - Yamaha DSP-AX2 Owner's Manual

REV. LEVEL (Reverberation Level)
Function .............. This parameter adjusts the volume of the reverberation sound.
Description ......... The larger the value, the stronger the reverberation becomes.
CT. DELAY (Center Delay)
Function .............. These parameters adjust the sound delay for each channel in 8 channel stereo mode.
LS. DELAY (Left Surround Delay)
Function .............. These parameters adjust the sound delay for each channel in 8 channel stereo mode.
RC. DELAY (Rear Center Delay)
Function .............. These parameters adjust the sound delay for each channel in 8 channel stereo mode.
RS. DELAY (Right Surround Delay)
Function .............. These parameters adjust the sound delay for each channel in 8 channel stereo mode.
FL. DELAY (Front Left Delay)
Function .............. These parameters adjust the sound delay for each channel in 8 channel stereo mode.
FR. DELAY (Front Right Delay)
Function .............. These parameters adjust the sound delay for each channel in 8 channel stereo mode.

Resetting to the Factory Preset Value

To reset a parameter to the factory preset value
Select the parameter you want to reset. Then, press and hold + or – until the value stops at the factory preset value temporarily. (The
asterisk mark by the parameter name disappears on the video monitor.)
To reset all of the parameters back to the factory preset values
Use the SET MENU to reset all of the parameter values of all DSP programs within the selected group to the factory preset values. This
operation resets all of the parameter values of all DSP programs within that group to the factory preset values.
Notes:
• The available parameters may be displayed on more than one OSD page for some of the programs. To scroll through pages, press g or h.
• When "MEMORY GUARD!" appears on the screen, the Memory Guard function is on, and you cannot change parameter values. Turn off the
Memory Guard function using the SET MENU.
Sound Source
REV. LEVEL
Control Range 0 – 100 %
Time
Control Range 0 – 50 msec
Control Range 0 – 50 msec
Control Range 0 – 50 msec
Control Range 0 – 50 msec
Control Range 0 – 50 msec
Control Range 0 – 50 msec
DSP Parameter
61